LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Front Suspension System) >> Front Lower Arm Removal/Installation >> Front Lower Arm Inner Side Bolt (Front) Removal Note [MZI-3.7]

Front Lower Arm Inner Side Bolt (Front) Removal Note [MZI-3.7]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When working on the right side of vehicles, move the engine and transaxle slightly towards the front side of the vehicle so that the engine does not interfere with the removal of the lower arm rear side bolt.
  1. Disconnect the No. 1 engine mount (engine side). See ENGINE REMOVAL/INSTALLATION [MZI-3.7] .
  2. Move the engine and transaxle slightly towards the front side of the vehicle.
  3. Remove the front lower arm inner side bolt (front).
scientia non olet · About LEMON Manuals