LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Front Suspension System) >> Front CROSSMEMBER Removal/Installation [MZI-3.7] >> Tie-rod End Removal Note

Tie-rod End Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach the tie-rod end from the steering knuckle using the SST  .
    Fig 1: Detaching Tie-Rod End From Steering Knuckle Using SST
    G06199937Courtesy of MAZDA MOTORS CORP.