LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Front Suspension System) >> Front CROSSMEMBER Removal/Installation [MZI-3.7] >> No. 1 Engine Mount Installation Note

No. 1 Engine Mount Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the No. 1 engine mount to the front crossmember and temporarily tighten the bolt until approx. three pitches are visible.
scientia non olet · About LEMON Manuals