LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Gear And Linkage Disassembly >> Tie-rod End Disassembly Note

Tie-rod End Disassembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place alignment marks as shown in the figure for proper installation.
  2. Remove the tie-rod end.
    Fig 1: Identifying Alignment Marks On Tie-Rod End
    G06200234Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals