LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Gear And Linkage Disassembly >> Seal Ring, O-ring Disassembly Note

Seal Ring, O-ring Disassembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut off the seal rings using a utility knife and remove them from the steering rack.
    CAUTION:
    • Be careful not to damage the steering rack and seal ring groove in the piston when cutting off the seal ring. Otherwise, the power steering system may not operate normally.
  2. Remove the O-ring from the steering rack.