Mounting Rubber Disassembly Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the mounting rubber from the gear housing using the SSTs and a press.
Substitution SST
- 49 B032 317
Outer diameter: 20.0-24.5 mm {0.79-0.96 in}
Height: 40 mm {1.6 in} or more
- 49 V001 525
Inner diameter: 34 mm {1.3 in} or more
Outer diameter: 36-39 mm {1.42-1.53 in}
Plate thickness: 1 mm {0.04 in} or more
Height: 40 mm {1.6 in} or more
- 49 B032 317