Oil Seal Assembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Using the SST and press, assemble the oil seal to the valve housing.
NOTE:
- Assemble the oil seal groove area so that it is facing the gear housing.
Substitution SST
- 49 T032 302
  Outer diameter: 27-30 mm {1.07-1.18 in}
  
  Fig 1: Using SST To Install Oil Seal
  Courtesy of MAZDA MOTORS CORP.