LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (General Procedures [Suspension System)) >> General Procedures (Suspension) >> Brake Lines Disconnection/Connection

Brake Lines Disconnection/Connection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Brake fluid will damage painted surfaces. If brake fluid does get on a painted surface, wipe it off immediately.
  1. Tighten the brake pipe flare nut using the commercially available flare nut wrench. Be sure to modify the brake pipe flare nut tightening torque to allow for use of a commercially available flare nut wrench.
  2. If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.
scientia non olet · About LEMON Manuals