Dust Seal (RH) Assembly Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Apply grease to a new dust seal (RH) lip.
- Assemble a new dust seal (RH) using the SST
and a press.
Substitution SST
- 49 G028 203
Outer diameter: 64 mm {2.5 in} or more
Inner diameter: 58.0-59.5 mm {2.29-2.34 in}
Inner depth: 38.5 mm {1.52 in}
- 49 W034 301
Inner diameter: 67.5-72.0 mm {2.7-2.8 in}
Plate thickness: 1 mm {0.04 in} or more
Inner depth: 8.5 mm {0.33 in} or more
- 49 G028 203