Dust Seal (LH) Assembly Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Apply grease to a new dust seal (LH) lip.
- Install a new dust seal (LH) using the SSTs
and a press.
Substitution SST
- 49 G028 203
Outer diameter: 64 mm {2.5 in} or more
Inner diameter: 58.0-59.5 mm {2.29-2.34 in}
Inner depth: 38.5 mm {1.52 in}
- 49 B025 004
Outer diameter: 58.0-59.8 mm {2.29-2.35 in}
Inner diameter: 53 mm {2.1 in} or more
Inner depth: 7.5 mm {0.30 in}
- 49 G028 203