Dust Seal (RH) Assembly Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Apply grease to a new dust seal lip.
- Install the dust seal (RH) using the SSTs
.
Substitution SST
- 49 B025 004
Outer diameter :51-55 mm {2.01-2.16 in}
Inner diameter: 49 mm {1.9 in} or more
Inner depth: 7.5 mm {0.30 n} or more
Courtesy of MAZDA MOTORS CORP.