Dust Seal (LH) Assembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Apply grease to a new dust seal lip.
Install a new dust seal (LH) using the SSTs and steel plate.
Substitution SST
- 49 G028 201
  Outer diameter: 57-64 mm {2.3-2.5 in}
  
  Fig 1: Installing Dust Seal (LH) Using SST And Steel Plate
  Courtesy of MAZDA MOTORS CORP.