LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Drive Shaft) >> Drive Shaft (Tripod Joint) Disassembly/Assembly >> Outer Ring Disassembly Note

Outer Ring Disassembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place an alignment mark on the drive shaft and outer ring.
  2. Remove the outer ring.
    Fig 1: Identifying Alignment Mark On Drive Shaft And Outer Ring
    G06205474Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals