LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Drive Shaft) >> Drive Shaft (Tripod Joint) Disassembly/Assembly >> Dynamic Damper Assembly Note

Dynamic Damper Assembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the dynamic damper as shown in the figure.

    Standard length 

    L5: 245-251 mm {9.65-9.88 in} 

    MZI-3.7:198-204 mm {7.80-8.03 in} 

  2. Install a new boot band onto the dynamic damper.
    Fig 1: Identifying Dynamic Damper
    G06205477Courtesy of MAZDA MOTORS CORP.