LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Exhaust System (MZI-3.7)) >> Exhaust System Removal/Installation [MZI-3.7] >> Warm Up Three Way Catalytic Converter (WU-TWC) (RH) Removal Note

Warm Up Three Way Catalytic Converter (WU-TWC) (RH) Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the joint shaft (See JOINT SHAFT REMOVAL/INSTALLATION ).
  2. Disconnect the HO2S (RH) connector.
  3. Remove the WU-TWC (RH).