Manual Shaft Nut Installation Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Set the adjustable wrench as shown to hold the manual shaft lever and tighten the manual shaft nut.CAUTION:
- Do not use an impact wrench. Hold the manual shaft lever when installing the manual shaft nut, or the transaxle may be damaged
Tightening torque 32-46 N.m {3.3-4.6 kgf.m, 24-33 ft.lbf}