LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 592 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Automatic Transaxle Removal/Installation [FS5A-El] >> Transaxle Mounting Bolts (Lower Side) Removal Note

Transaxle Mounting Bolts (Lower Side) Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust the SST (49 C017 5A0) and lean the engine toward the transaxle.
  2. Support the transaxle on a jack.
  3. Remove the transaxle mounting bolts.
  4. Remove the transaxle.
    Fig 1: Supporting Transaxle
    G06205920Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals