No. 4 Engine Mount Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Tighten nuts on the No. 4 engine mount bracket in the order of A→B→C.
Tightening torque 67-93 N.m {6.8-9.4 kgf.m, 50-68 ft.lbf}

Fig 1: Identifying No. 4 Engine Mount Bracket Nut Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
Tighten the new bolts on the No 4 engine mount.
Tightening torque 77-103 N.m {7.9-10 kgf.m, 57-75 ft.lbf}

Fig 2: Identifying No. 4 Engine Mount Bolts
Courtesy of MAZDA MOTORS CORP.