No. 1 Engine Mount Installation Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten bolts on the No. 1 engine mount in the order of A→B→C.
Tightening torque A, B: 77-103 N.m {7.9-10 kgf.m, 57-75 ft.lbf}
C: 94-116 N.m {9.6-11 kgf.m, 70-85 ft.lbf}
Courtesy of MAZDA MOTORS CORP.