Starter Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If there is peeling on or damage to the insulator, attach a new insulator using the following procedure:

Peel off the insulator from the starter completely using a scraper.

Fig 1: View Of Peeling Insulator Of Starter
Courtesy of MAZDA MOTORS CORP.
Degrease the insulator attachment area.

Fig 2: Identifying Insulator Attachment Area
Courtesy of MAZDA MOTORS CORP.
Attach a new insulator to the starter.

Fig 3: Attaching Insulator To Starter
Courtesy of MAZDA MOTORS CORP.