Clearing DTCs Procedure

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to the DLC-2.

Fig 1: Identifying DLC-2

Courtesy of MAZDA MOTORS CORP.

After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
  1. Select "Self Test".
  2. Select "Modules".
  3. Select "TCM".
- When using the PDS (Pocket PC)
  1. Select "Module Tests".
  2. Select "TCM".
  3. Select "Self Test".
Verify the DTC according to the directions on the M-MDS screen.
Press the clear button on the DTC screen to clear the DTC.