LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (On-Board Diagnostic [Dynamic Stability Control)) >> On-Board Diagnosis [Dynamic Stability Control (DSC)] >> PID/DATA Monitor Table

PID/DATA Monitor Table

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
PID name (definition) Unit/Condition Operation condition (reference) Action DSC HU/CM terminal
BRK_FLUID Normal/Low
  • Brake fluid level is normal. Normal
  • Brake fluid level is low. Low
 Inspect the brake fluid level sensor
(See BRAKE FLUID LEVEL SENSOR INSPECTION .)		 -
BRAKE_SW On/Off
  • Brake pedal depressed. On
  • Brake pedal released: Off
 Inspect the brake switch.
(See BRAKE SWITCH INSPECTION .)		 C
LAT_ACCL G
  • Vehicle stopped or driving at constant speed: 0 G 
  • Cornering to right-Changes 0 G-positive 
  • Cornering to left. Changes 0 G-negative 
 Inspect the combined sensor
(See COMBINED SENSOR INSPECTION .)		 -
MCYLI_P Pa, psi
  • Brake pedal released: 0 Pa, 0 psi 
  • Brake pedal depressed. Changes according to the brake fluid pressure
 Inspect the brake fluid pressure sensor
(See BRAKE FLUID PRESSURE SENSOR INSPECTION .)		 -
PMP_MTR On/Off
  • Pump motor activated. On
  • Pump motor not activated. Off
 Inspect the DSC HU/CM
(See DSC HU/CM INSPECTION .)		 -
STEER_ANGL °
  • Steering wheel in neutral position (not turned) 0°
  • Steering wheel turned to left: Changes 0°- negative 
  • Steering wheel turned to right. Changes 0°- positive 
 Inspect the steering angle sensor.
(See STEERING ANGLE SENSOR INSPECTION .)		 -
VPWR V
  • Switch the ignition to ON. Approx. 12.2 V 
  • Idling: Approx. 14.1 V 
 Inspect power supply circuit
(See DSC HU/CM INSPECTION .)		 AF
V_LF_INL On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated. Off
 Inspect the DSC HU/CM
(See DSC HU/CM INSPECTION .)		 -
V_LF_OTL On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated Off
 -
V_LR_INL On/Off
  • Solenoid valve activated. On
  • Solenoid valve not activated: Off
 -
V_LR_OTL On/Off
  • Solenoid valve activated On
  • Solenoid valve not activated Off
 -
V_RF_INL On/Off
  • Solenoid valve activated. On
  • Solenoid valve not activated Off
 -
V_RF_OTL On/Off
  • Solenoid valve activated On
  • Solenoid valve not activated. Off
 -
V_RR_INL On/Off
  • Solenoid valve activated On
  • Solenoid valve not activated. Off
 -
V_RR_OTL On/Off
  • Solenoid valve activated. On
  • Solenoid valve not activated. Off
 -
V LIN_L On/Off
  • Solenoid valve activated. On
  • Solenoid valve not activated Off
 Inspect the DSC HU/CM
(See DSC HU/CM INSPECTION .)		 -
V_LIN_R On/Off
  • Solenoid valve activated-On
  • Solenoid valve not activated Off
 -
YAW_RATE °/s
  • Vehicle stopped or driving straight: 0 °/s
  • Cornering to left. Changes 0 °/s-negative 
  • Cornering to right. Changes 0 °/s-positive 
 Inspect the combined sensor.
(See COMBINED SENSOR INSPECTION .)		 -
WSPD_LF KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: Vehicle speed
 Inspect the LF ABS wheel-speed sensor.
(See FRONT ABS WHEEL-SPEED SENSOR INSPECTION .)		 S, P
WSPD_LR KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: Vehicle speed
 Inspect the LR ABS wheel-speed sensor.
(See REAR ABS WHEEL-SPEED SENSOR INSPECTION .)		 L, I
WSPD_RF KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: Vehicle speed
 Inspect the RF ABS wheel-speed sensor.
(See FRONT ABS WHEEL-SPEED SENSOR INSPECTION .)		 R, O
WSPD_RR KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running. Vehicle speed
 Inspect the RR ABS wheel-speed sensor.
(See REAR ABS WHEEL-SPEED SENSOR INSPECTION .)		 M, J
scientia non olet · About LEMON Manuals