DTC U3000:4A [Dynamic Stability Control (DSC)]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE
| DTC U3000:4A |
DSC HU/CM mismatched installation |
| DETECTION CONDITION |
- Detection the mismatched installation of DSC HU/CM.
|
| POSSIBLE CAUSE |
- PCM malfunction
- DSC HU/CM malfunction
- Mismatched installation of DSC HU/CM
- Configuration procedure is not done properly
|