DTC C0001:01/C0003:01/C0010:01/C0011:01/C0014:01/C0015:01/C0018:01/C0019:01/C001C:01/C001D:01 [Dynamic Stability Control (DSC)]: Notes

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION AND POSSIBLE CAUSE

C0001:01	Linear control solenoid valve system
C0003:01	Linear control solenoid valve system
C0010:01	LF inlet solenoid valve system
C0011:01	LF outlet solenoid valve system
C0014:01	RF inlet solenoid valve system
C0015:01	RF outlet solenoid valve system
C0018:01	LR inlet solenoid valve system
C0019:01	LR outlet solenoid valve system
C001C:01	RR inlet solenoid valve system
C001D:01	RR outlet solenoid valve system
DETECTION CONDITION	C0001:01/C0003:01 Detect the open circuit in solenoid valve circuit while the each solenoid is off. Detect the abnormal output current of the each solenoid C0010:01/C0011:01/C0014:01/C0015:01/C0018:01/C0019:01/C001C:01/C001D:01 Detect the mismatch condition between solenoid output and solenoid monitor.
POSSIBLE CAUSE	Solenoid valve operation malfunction Connector or terminal malfunction DSC HU/CM malfunction Short or open circuit in solenoid valve circuit