LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (On-Board Diagnostic [HVAC)) >> Clearing DTC

Clearing DTC

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test"
      2. Select "Modules"
      3. Select "EATC".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests"
      2. Select "EATC"
      3. Select "Self Test".
        Fig 1: Identifying DLC-2
        G06206031Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON and wait for 5 s or more. 
  7. Press the retest button on the DTC screen.
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals