LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (On-Board Diagnostic [HVAC)) >> A/C Operation Check Mode Display

A/C Operation Check Mode Display

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Body"
      2. Select the "EATC Operation Check".
    • When using the PDS (Pocket PC)
      1. Select the "All Tests and Calibrations".
      2. Select the "EATC Operation Check"
  3. Select the "EATC Operation Check" from the screen menu
  4. Verify the A/C operation check mode according to the directions on the screen
    Fig 1: Identifying DLC-2
    G06206043Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals