LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 582 (Charging System (MZI-3.7)) >> Generator Inspection [MZI-3.7] >> Generator Inner Parts >> Stator Coil

Stator Coil

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the continuity is as indicated in the table.
    Fig 1: Terminals Continuity Chart
    G06205150Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Stator Coil Terminals
    G06205151Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the stator.
  2. Verify that there is no continuity between the stator coil leads and core using a tester.
    • If there is continuity, replace the stator coil.
    Fig 3: Checking Continuity Between Stator Coil Leads And Core Using Tester
    G04859737Courtesy of MAZDA MOTORS CORP.