LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 576 (Engine Mechanical [Intake-Air System MZI-3.7)) >> Intake-Air System Removal/Installation [MZI-3.7] >> Fresh-Air Duct Installation Note

Fresh-Air Duct Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • If the coolant reserve tank hose is installed to the clips at the wrong locations, the hose may contact other parts and be damaged. When reinstalling the coolant reserve tank hose to the clips, install it to the original locations according to the following procedure.
Fig 1: Identifying Coolant Reserve Tank Hose And Clip
G06204948Courtesy of MAZDA MOTORS CORP.
  1. Install the coolant reserve tank hose to the clips as shown in the figure.
Fig 2: Installing Coolant Reserve Tank Hose And Clip
G06204967Courtesy of MAZDA MOTORS CORP.