When Using SST 49 N013 103A (Part Of 49 N013 1A0D)

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Complete the "BEFORE SERVICE PRECAUTION". See BEFORE SERVICE PRECAUTION [MZI-3.7] .
Insert the SST into the quick release connector.
Pull out the fuel hose straight from the fuel pipe and disconnect it.
Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to prevent it from scratches or dirt.

Fig 1: Inserting SST Into Quick Release Connector

Courtesy of MAZDA MOTORS CORP.