LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Fuel System (MZI-3.7)) >> Fuel Pump Unit Inspection [MZI-3.7] >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .
  2. Disconnect the fuel pump unit connector.
  3. Inspect for continuity between fuel pump unit connector terminals B and D.
Fig 1: Identifying Fuel Pump Unit Pump Side Connector
G06204995Courtesy of MAZDA MOTORS CORP.