Cooling Fan Control System Inspection: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- Start the engine and warm it up to normal operating temperature.
- Perform the KOER self-test. (See KOEO/KOER SELF TEST [MZI-3.7] .)
- Verify that the DTC P0480:00 is not shown and the cooling fan operates during the KOER self-test.
- If DTC P0480:00 is shown, perform the DTC troubleshooting procedure. (See DTC TABLE [MZI-3.7] .)
- If the cooling fans do not operate, indicated order in accordance with fan operation conditions: