Cooling fan motor No. 1 does not operate
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect for followings:
- Open or short to ground circuit between the fan control module and cooling fan motor No. 1
- Poor connection of the fan control module connector or cooling fan motor No. 1 connector
- If there is no malfunction, replace the cooling fan component.
(See COOLING FAN COMPONENT REMOVAL/INSTALLATION [MZI-3.7] .)
- If there is no malfunction, replace the cooling fan component.