LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Cooling System (MZI-3.7)) >> Water Pump Removal/Installation [MZI-3.7] >> Water Pump Installation Note

Water Pump Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the water pump bolts in the order shown in the figure.

    Tightening torque 

    9-11 N.m {92-112 kgf.cm, 80-97 in.lbf} 

    Fig 1: Identifying Water Pump Bolts Tightening Sequence
    G06199900Courtesy of MAZDA MOTORS CORP.