OCV Component Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the OCV component bolts in the order shown in the figure.

Fig 1: Identifying OCV Component Bolt Tightening Sequence (RH)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying OCV Component Bolt Tightening Sequence (LH)

Courtesy of MAZDA MOTORS CORP.

Tightening torque

9-11 N.m {92-112 kgf.cm, 80-97 in.lbf}