LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Engine Mechanical [Service Information MZI-3.7]) >> Timing Chain Removal/Installation [MZI-3.7] >> Cylinder Head Cover Oil Seal Installation Note

Cylinder Head Cover Oil Seal Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Installation of new seal is only required if damaged seal were removed during disassembly of the engine.
  1. Push the OCV attachment hole seal slightly in by hand.
  2. Tap the OCV attachment hole seal using the SST  and hammer.
    Fig 1: Installing Cylinder Head Cover Oil Seal
    G04969382Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals