Front Oil Seal Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Apply clean engine oil to the front oil seal bore in the engine front cover.

Push the front oil seal slightly in by hand.
Tap the front oil seal in evenly using the SST and a hammer.

Fig 1: Installing Front Oil Seal
Courtesy of MAZDA MOTORS CORP.

Substitution SST
- 49 G028 203
  Outer diameter. 58-70 mm {2.3-2.7 in}
  
  Inner diameter: 56-58 mm {2.21-2.28 in}
  
  Tube with board thickness 2 mm {0.08 in} or more