LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Engine Mechanical [Service Information MZI-3.7]) >> Front Oil Seal Replacement [MZI-3.7] >> Crankshaft Pulley Lock Bolt Removal Note

Crankshaft Pulley Lock Bolt Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover as shown in the figure.
    Fig 1: Identifying Cover & Fastener
    G06199313Courtesy of MAZDA MOTORS CORP.
  2. Set a wrench to the drive plate bolt at the position shown in the figure to lock the crankshaft rotation.
    3. Fig 2: Locking Crankshaft Rotation
    G04969420Courtesy of MAZDA MOTORS CORP.
  3. Remove the crankshaft pulley lock bolt and washer.
scientia non olet · About LEMON Manuals