LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Engine Mechanical [Service Information MZI-3.7]) >> Engine Disassembly/Assembly [MZI-3.7] >> Water Inlet Pipe Installation Note

Water Inlet Pipe Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine coolant to the O-ring.
scientia non olet · About LEMON Manuals