PID/Data Monitor Table [Instrument Cluster]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

PID name (definition)

Input-output signal

Unit/status

Terminal

ECT_GAUGE

Engine coolant temperature

°C

EX_TEMP

Ambient temperature

°C

1B, 1C

FUELJNPT

Resistance value of fuel gauge sender unit

ohm

2M, 2D

NUMKEYS⁽¹⁾

Number of key ID numbers programmed with the vehicle
(With keyless entry system)

ODO_CNT

Displays odometer data

NOTE:

Distance is displayed within a range of 0 to 51 m {0 to 167 ft} repeatedly.
Data is reset to 0 m {0 ft} by switch the ignition to off.

SPDMTR

Vehicle driven: Displays vehicle speed

KPH, MPH

TACHOMTR

When the engine is running. Indicate the engine speed

RPM

VPWR

Indicate the battery voltage

⁽¹⁾	Vehicles with keyless entry system