Active Command Modes Table [Instrument Cluster]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Command name	Operation condition	Output part name	Unit/Operation
ALARM	On: Warning alarm sounds	Warning alarm (Instrument cluster)	On/Off
ECT_GAUGE	C (50 DegC): Engine coolant temperature gauge needle moves to C H (128 DegC): Engine coolant temperature gauge needle moves to H Off: Engine coolant temperature gauge needle moves to lower area	Engine coolant temperature gauge (Instrument cluster)	C (50 DegC)/H (128 DegC)/Off
FUEL_GAUGE	E: The fuel gauge needle moves E 1/2: The fuel gauge needle moves 1/2 F: The fuel gauge needle moves F	Fuel gauge (Instrument cluster)	E/1/2/F
LCD_SEG	On: LCD segment displayed	LCD segment (Instrument cluster)	On/Off
SPDMTR	60 km/h {37 mph} : Speedometer gauge needle moves to approx. 65 km/h {40 mph} 120 km/h {74.6 mph} . Speedometer gauge needle moves to approx. 128 km/h {79.5 mph} Off: Speedometer gauge needle moves to 0 km/h {0 mph}	Speed meter (Instrument cluster)	60 km/h {37 mph}/ 120 km/h {74.6 mph}/ Off
TACHOMTR	3,000 RPM Tachometer gauge needle moves to approx. 3,100 RPM 6,000 RPM Tachometer gauge needle moves to approx. 6,200 RPM Off: Tachometer gauge needle moves to 0 RPM	Tachometer (Instrument cluster)	3,000 RPM/ 6,000 RPM/ Off
WL+IL	On Warning/indicator lights illuminate	Warning light, indicator light (Instrument cluster)	On/Off