LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 554 (Fuel System (L5)) >> Fuel Line Pressure Inspection [L5] >> Using M-MDS

Using M-MDS

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the negative battery cable. See BATTERY REMOVAL/INSTALLATION [L5] .
  2. Connect the M-MDS to the DLC-2.
  3. Using the simulation function "FP", start the fuel pump. See ON-BOARD DIAGNOSTIC TEST [L5] .
Fig 1: Identifying DLC-2
G06204979Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals