Resistance Inspection
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Disconnect the throttle body connector.
- Measure the resistance between throttle body terminals E and F.
- If not as specified, replace the throttle body. See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L5] .
Specification
RESISTANCE SPECIFICATION CHART
| Ambient temperature (°C {deg;F}) | Resistance (ohm) |
|---|---|
| Approx 20 {68} | 0 3-100 |