Oil Pump Installation Note
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten the oil pump bolts in two steps in the order shown in the figure.
Tightening torque
Step 1: 8-12 N.m {82-122 kgf.cm, 71-106 in.lbf}
Step 2: 17-23 N.m {1.8-2.3 kgf.m, 13-16 ft.lbf}
Courtesy of MAZDA MOTORS CORP.