LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2012
>>
6 i Touring
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 550 (Engine Control System (L5))
>>
Pcm Inspection [L5]
>>
Inspection Using An Oscilloscope (Reference)
>>
OCV control signal
OCV control signal
WARNING:
This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: OCV Control Signal Waveform Graph
Courtesy of MAZDA MOTORS CORP.
PCM terminals
2E(+)-body ground(-)
Oscilloscope setting
2 V/DIV (Y), 0.8 ms/DIV (X), DC range
Vehicle condition
Idle after warm up