LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2012
>>
6 i Touring
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 550 (Engine Control System (L5))
>>
Pcm Inspection [L5]
>>
Inspection Using An Oscilloscope (Reference)
>>
CKP sensor signal
CKP sensor signal
WARNING:
This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: CKP Sensor Signal Waveform Graph
Courtesy of MAZDA MOTORS CORP.
PCM terminals
2W(+)-body ground(-)
Oscilloscope setting
1 V/DIV (Y), 5 ms/DIV (X), DC range
Vehicle condition
Idle after warm up