LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Engine Mechanical [Service Information L5]) >> Timing Chain Removal/Installation [L5] >> Cylinder Head Cover Removal Note

Cylinder Head Cover Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the cylinder head cover bolts in the order shown in the figure.
    Fig 1: Identifying Cylinder Head Cover Bolt Loosening Sequence
    G06199789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals