Ignition Timing Inspection
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The ignition timing cannot be adjusted
- The M-MDS is required to verify the ignition timing
- Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
- Verify the ignition timing (M-MDS: SPARKADV) using the PID/data monitor function of the M-MDS.
Ignition timing
Approx. BTDC 12°
- Verify that ignition timing advances when the engine speed increases gradually