LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Engine Mechanical [Service Information L5]) >> Cylinder Head Gasket Replacement [L5] >> Cylinder Head Removal Note

Cylinder Head Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the cylinder head bolts in 2-3 steps in the order shown in the figure.
    Fig 1: Identifying Cylinder Head Bolt Loosening Sequence
    G05543087Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals