LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Engine Mechanical [Service Information L5]) >> Cylinder Head Gasket Replacement [L5] >> Camshaft Removal Note

Camshaft Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The cylinder head and the camshaft caps are numbered to be reassembled in their original position correctly. When removed, keep the caps with the cylinder head they were removed from. Do not mix the caps.
  1. Loosen the camshaft cap bolts in 2-3 steps in the order shown in the figure.
    Fig 1: Identifying Camshaft Cap Bolt Loosening Sequence
    G06199777Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals