With fan control module relay

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Inspect for followings
- Open circuit between the fan control module relay and battery post
- Open circuit between the fan control module relay and BCM
- Open circuit between the fan control module relay and fan control module
- Open circuit between the fan control module and ground
- Poor connection of the fan control module connector
- Fan control module relay malfunction
  - If there is no malfunction, replace the cooling fan component. (See COOLING FAN COMPONENT REMOVAL/INSTALLATION [L5] .)